Best Multimeter Under $100 – 2019’s Top 10 Recommended Picks
If you are dead serious about electrical maintenance, then a multimeter is a must-have for you. When it comes to getting the Best Multimeter Under 100 USD , you can end up with the best just as easily as you would end up with an inferior one.
there’s quite a lot to take into account while shopping for the best but the truth is that at the end of the day, we’re all looking for something that’ll be able to meet our exact demands.
What if I told you that you’d be able to get exactly what you are looking for just by reading this article? What if I gave you the guarantee that in 2019, you’ll have the latest and the best multimeters under 100? Well, despite the fact that this sounds too good to be true, it’s actually our obligation to give you nothing but the best.
In this section, we’ll be taking a look at how you could get the best multimeter under 100 USD , the best maintenance you could give one and then wrap things up after taking a look at 10 of the best.
Without further ado, let’s get to it, shall we?
- 1 Buying Guide - How to get the Best Multimeter Under 100 USD
- 2 10 Best Multimeter Under 100 USD
- 2.1 1. SURPEER 20000 Counts Multi Capacitor Tester True RMS
- 2.2 2. Klein Tools MM600 Auto-Ranging 1000V Digital Multimeter
- 2.3 3. TRMS Digital Multimeter eM860T by ennoLogic
- 2.4 4. Fluke 101 Basic Digital Multimeter Pocket Portable Meter
- 2.5 5. Tacklife DM06 Premium Smart Digital Multimeter
- 2.6 6. Digital Multimeter with Battery Tester
- 2.7 7. INNOVA 3340 Automotive Digital Multimeter
- 2.8 8. Amprobe AM-510 Commercial/Residential Multimeter
- 2.9 9. AstroAI Digital Multimeter, TRMS 6000 Counts Volt Meter
- 2.10 10. Proster Auto-Ranging Digital Multimeter 6000 Counts
- 2.11 Final verdict.
3 of Our Most Recommended Picks of Under 100 USD
first off, before we move on to the buying guide, let’s take a look at 3 of our #1 rated choices to save you the hassle of having to read all through.
Buying Guide - How to get the Best Multimeter Under 100 USD
How to use a digital multimeter.
First things first, you need to clearly know how one works before you spend a dime on it. here’s all there is to know about digital multimeters.
if you’ve ever experienced how painful an electric shock can be, then you can definitely agree safety should be given the #1 priority when it comes to the multimeters. Other than just ourselves, the safety precautions that we observe should also be able to protect the multimeter itself.
General precautionary measures you should always observe.
When you are not using the digital multimeter, you should always ensure that the knob is in the off position which is also the highest voltage position.
When it comes to checking for any hazardous voltage in an electrical circuit, it is important that you do so for the AC and DC voltages
When it comes to voltage check, here are some of the things to take into account.
First off, you should not touch the bare tips of your probes together since this will lead to a short circuit which could damage the multimeter.
If you prefer to go for manual ranging multimeters, then you should make sure you choose the appropriate range. This normally has the multimeter scale reading near midway on the scale. Other than this, you should also go ahead and check for both the DC and AC voltages on your multimeter scales.
Selecting a lower range than that of the component you are measuring will result to the multimeter reading showing a 1. If you have a reading that is out of range, then the best thing for you to do for a DC circuit is start with a higher value then drop down the scale till you settle on the correct value.
When connecting the probes, ensure the banana probe of the red lead is in the correct port. Ig you happen to have it plugged into the current socket of the multimeter, then you may experience a short circuit as you take the voltage measurement.
Checking for continuity
Even though most people do not do this, it is always best that you do a continuity check before you start any measurement activity with the multimeter.
It’s quite simple…
For continuity, you first have to be certain that the reading on your digital multimeter is zero after you connect the leads. When checking for continuity, first of all, switch off any power supply to the circuit. Just in case there is any charged capacitor present in the circuit the beeper will sound until the capacitor is drained.
It is recommended that you always confirm the presence of a capacitor in your circuit in order to avoid any confusion. Conversely, if you change the black and red leads, the readings should remain the same.
Like most of the readings you’ll be measuring when using a multimeter, you should ensure that the power is turned off before you measure resistance.
Though you don't have to do this all the time, it is best that you measure a resistor alone since if you have other components connected to the circuit, you may affect the resistance reading. For you to get the correct and accurate resistance reading, also ensure that all the capacitors connected in the circuit are drained.
Other than voltage measurement, multimeters are expected to measure current just as conveniently.
First off, you should ensure that the multimeter is connected in series (we’ll be looking at correct multimeter usage shortly).
With the knob set to the current measuring mode and the right current set before measuring the current, you won’t risk blowing up the fuse within the multimeter. Something else that you need to be cautious about is measuring the mains current since this is quite dangerous to you and the multimeter.
After you are done measuring current and want to switch to voltage measurement, ensure that you switch the knob to the voltage mode since not doing so would be a potential hazard.
Here’s how the test leads should be.
Before taking into account the design of the multimeter, let’s take into account a really overlooked accessory- the probes and test leads.
You probably have never considered the fact that probes and test leads could be quite significant, right? Well, to cut to the chase, the truth is no matter how good your multimeter may be or how much money you might have spent on it, having poor functioning test leads could be quite the risk.
If for instance, the probes do not have a safety rating of the power circuit you are measuring, you could really hurt yourself. The safety rating of the meter does apply to the leads, the test probes, the clips and even the clamp on.
Ensure that the multimeter has got safety certification
When it comes to certification, most people go for the meters that have IEC 61010 certification which, despite being satisfactory, may at times end up disappointing you. This is so because in most cases, multimeter manufacturers may self-certify their meters to meet the standards. As a result, a meter that may be labeled as a CAT III-600V may actually not be as good as you may expect it to be when it’s passed through independent testing in the lab.
Here’s what you should do…
When you want to get the safest multimeter, you should go for the meters that have undergone independent certification in a laboratory. The best of these are the UL and the CSA. Before the multimeter is certified, it has to meet the recommended tests which are why you should always go for the independent tests.
How to use a Multimeter
Other than just having the knowledge of which multimeter is safe for you and which ones not, you should also know how to use one. Before we move on to this, let’s have a look at the parts of a digital multimeter.
First off, there is the display. This one usually has got four digits and whereas some multimeters will have a low count when it comes to the display, some have as high as 6000 counts.
Other than this, some multimeter manufacturers go a notch higher to give their multimeters a backlit display feature. This normally allows you to be able to use your meter conveniently in low light areas.
The selection knobs.
Voltage and current are the main electrical units that a multimeter is expected to measure almost flawlessly. In order to do this, you’ll be needing the selection knob. If you have the autoranging multimeter, you’ll need to set the range on your own. On the other hand, if you’re lucky enough to have the autoranging multimeter, the range is normally set for you automatically.
Whereas a multimeter may be having two probes, the same does not go for the ports. At every point when taking the measurement, you’ll have the probes plugged into two of the ports at one point. The COM port normally has the black probe plugged into it which in turn goes to the ground or rather the negative end of the circuit in most cases.
When measuring large currents, you’ll be using the 10A port and by large, I mean anything that’s greater than 200mA. On the other hand, the mAVΩ is the port in which we conventionally have the red probe plugged into. This port will normally allow current measurement up to 200mA, voltage as well as resistance measurement.
Probe types on a multimeter.
Upon purchasing a multimeter, it'll normally come with probes but these are not the only types of probes you can use on the multimeter. Let's take a look at some of the probe types each of which can be used to make a given task twice as easy to handle.
If you need probes to connect to large wires on a breadboard, then these are definitely what you should go for. They are able to hold on to the components you are operating on hence the best when it comes to handling long-term operations. You won't have to worry about holding the probes on the test components which brings us to our next type of probes.
The test probes.
You’ll normally get this with most multimeters. Besides being cheap and easy to replace, they’ll be quite handy when taking most measurements both industrial as well as just basic home maintenance.
Other than just having the alligator clips and the normal test probes, the banana to tweezer probes will also come in handy. Just in case you’ll be needing to test the SMD components, these are what you ought to go for.
Finally, there is the banana to IC hooks.
One fact that we can definitely agree upon is that it can be quite a hassle to operate on the legs of ICs. Taking this into account, it can be quite convenient to have the IC hooks with you as compared to using the normal test probes.
Normal resistors are color coded but the truth of the matter is that at one point of the other, you are bound to be confused no matter how experienced you are when it comes to electronic. First off, the colors may not be that clear and secondly, if you need to do something in a rush, you’ll need a multimeter to assist you in measuring the resistance.
In order to take resistance, ensure that there is no current running via the circuit. Just like you do when taking most measurements using a multimeter, the black probe should be in the COM port and the red one in the VΩmA port switch on your multimeter and turn the dial to the resistance mode. Which is normally indicated by the ohm symbol.
If you have a manual ranging multimeter, you’ll have to set the range of measurement yourself. If unsure, start with the highest value and drop down the scale to get it correct. On an autoranging multimeter which should also be the best multimeter under 100 for you, all you have to do is select the unit of measurement, which in our case is resistance, and let the meter do the rest for you.
Resistance is non-directional and it does not matter which probe goes where on the circuit. Place each probe at either end of the circuit you want to test. If your meter reads close to zero, the range is too high for you to get a good measurement hence you should adjust the dial to a lower setting. If the range is too low, the reading is 1 or OL meaning the meter is overloaded or out of measurement range. In this case, turn the dial to a higher setting
Voltage measurement is necessary when carrying out basic home maintenance or also troubleshooting industrial electrical components.
Here’s how you should go about when measuring voltage:
Plug the black probe into the COM port and the red one on the VΩmA port. Switch on your multimeter and regarding the type of voltage you are measuring, turn the dial setting to either AC or DC voltage mode which is indicated by a V with a straight line.
Unless you have an autoranging multimeter, you’ll have to set the range yourself. Conversely, for the manual ranging multimeters, setting the range should be done with respect to the settings present on the dial list.
If for instance, you expect to measure a voltage that's more than 2 volts but less than 20 volts, you should set the dial to the 20-volt setting. On the other hand, if you are not sure of the amount of voltage you are measuring, start with the highest setting.
The red probe should be on the positive terminal of the component you are measuring and the black one on the negative one. Too high a range might give you inaccurate readings.
On the other hand, if the range is too low, the multimeter will read 1 or indicate OL meaning that it is either overloaded or out of range in which case you need to turn the dial to a higher setting.
Testing for continuity
A continuity test is simply what tells us whether or not two electrical components are connected or not or rather whether or not there is a continuous flow of current in the circuit. If the continuity test is negative, it means that there is a flaw somewhere in the circuit and it could be caused by something as simple as a bad solder joint or a blown fuse.
Plug the black probe into the COM port and the red one in the VΩmA port. Turn the multimeter on and turn the dial to the continuity mode which is indicated by three arcs.
For continuity test, the multimeter sends a little current through the load. If the circuit is complete, you’ll see a zero on the screen and if otherwise, there’ll be a 1 or OL (open loop) on the display.
Just like resistance, continuity is also non-directional hence it does not matter how the probes are connected.
10 Best Multimeter Under 100 USD
Moving on to the second section of our review, it’s time to have a look at some of the best digital multimeters you could possibly get for your money.
1. SURPEER 20000 Counts Multi Capacitor Tester True RMS
From the title alone, you can tell that the first on our list is definitely something worth trying out. For starters, you can tell from the title alone that it's accuracy is outstanding due to the fact that it is a true RMS multimeter. This allows you to measure both the AC and DC currents with ultimate accuracy. Other than this, it is a 20000-count multimeter.
When it comes to the display, the multimeter comes with an auto power off function that enables you to save on power. This indeed makes it the best assistant when it comes to home maintenance, factory as well as laboratory use. Still, on the display, you'll be having the data hold feature which freezes the values on the LCD display even after you unplug the probes from the multimeter.
The LCD display is an outstanding 4 ½ display that is also backlit hence making it easier and more comfortable to be able to use the multimeter in dim light.
As far as safety is concerned, there is both the NCV and the Overload protection. The sensor on the multimeter will normally light up and buzz if the voltage registered is greater than 700V. if also uses the PTC ceramics protection circuit for both resistance and frequency measurement.
2. Klein Tools MM600 Auto-Ranging 1000V Digital Multimeter
Moving on, let’s have a look at the Klein Tools MM600. If you're looking for the multimeter under 100, then this one is definitely bound to give you the biggest bang for your buck.
First off, the multimeter is an autoranging one. If you’re getting it as an upgrade or as your first multimeter, it is bound to serve you quite well. Considering it will be saving you both the time and hassle of having to set the range yourself, it will be worth every dime.
the multimeter is constructed with the low battery indicator which means that you’ll always know when it’s time to look for a battery replacement.
When it comes to safety, it’s got a CAT IV rating on it and more so, the multimeter is built to withstand a 2-meter drop as well as daily wear and tear as you use it. Taking these two into account, you won’t have to worry about the meter being damaged by high voltages or coming apart from an accidental drop.
Other than just being an autoranging multimeter, it also does measure most electrical units. These include both AC and DC voltages and current, resistance, diode continuity, capacitance, frequency and duty cycle.
3. TRMS Digital Multimeter eM860T by ennoLogic
As far as convenience is concerned, this multimeter is definitely bound to give you a bang for your money regardless of whether you’ll be using it for basic home maintenance or industrial use. You can accurately be able to measure voltage, resistance, current, capacitance, temperature, frequency and duty cycle.
Other than just being able to measure most electrical units, something else that is worth pointing out about this meter is that it is a true RMS multimeter, this simply means that as long as you have this, you'll be having ultimate accuracy when measuring both AC and DC currents.
The response is fast and the same goes for resistance measurement which has an accuracy of 0.5% for most ranges and 1.5% for anything that is greater than 6 Megaohm. The multimeter also does feature audible continuity check as well as diode test function
Despite just being accurate, a digital multimeter would not be as good if it had a poor display. In our case, you’ll be getting a 6000-count display which means that other than high accuracy, you’ll measure a wide range of values. It also does have the max/min function and a backlit LCD screen for use in low light conditions.
There is also the auto power off feature that is triggered if the multimeter remains idle for 15 minutes hence you get to save on quite a lot of energy. The best part about the auto power off is that you can disable it as well.
4. Fluke 101 Basic Digital Multimeter Pocket Portable Meter
If you want something that’s exclusively meant for industrial use, then this is definitely what you should spend your money on.
Starting with the safety rating, the Fluke 101 comes with the CAT III 600V rating which gives you the advantage of being able to measure large voltage measurements. Other than this, it does have a rugged rubber design which simply gives it a drop protection.
The small and lightweight design, on the other hand, allows you to conveniently be able to use the multimeter even with one hand.
Something else that’s worth mentioning about this multimeter is that it does come with the automatic shut down feature that saves on battery power. Speaking of battery power, the multimeter’s is easy to replace.
When it comes to usability and convenience, the multimeter does have the autoranging feature. Other than just saving you the hassle and time of setting the range yourself, the multimeter can be quite handy especially if you are using it for the first time.
5. Tacklife DM06 Premium Smart Digital Multimeter
We’re almost past halfway on our review and we’re doing good so far. Coming up 5th, we’ve got the Tacklife DM06. If you are looking for something that’ll give you utmost comfort and simplicity when it comes to usage, this one’s definitely it.
Starting with the design, the multimeter is made to fit in the palm of your hand perfectly. Other than this, the LCD display is an outstanding 2.7 inches which will give you the easiest time when taking your readings. Besides just having a large display, it’s a true RMS 6000 count multimeter hence you’ll be getting the best accuracy.
The meter also comes with a backlight display for easy usage in dim light and to back this up, there is the auto power off feature that is triggered after 10 minutes of being idle. The low battery indicator on the meter also lets you know when to replace the 1.5 V AAA batteries.
The fact that this is an autoranging multimeter makes it ideal for taking most electrical units. Speaking of electrical units, you can conveniently be able to measure AC/DC voltage up to 600V, AC/DC current, resistance, frequency, continuity, temperature, transistor and capacitance as well.
6. Digital Multimeter with Battery Tester
Past halfway through our review and we're doing good so far. Let’s take a look at what the ennoLogic eM530S does pack under the hood, shall we?
First off, if you want something that'll be convenient for you regardless of whether you are an electrician, for basic home use or for troubleshooting automotive appliances, this one's what you should go for.
Starting with the display, it’s a large and easy to read LCD. Other than this, you’ll also be getting the backlight function for easy usability in low light conditions.
As for accuracy, this multimeter is accurate to 0.7% for DC voltage readings and 1.2% for taking most DC current ranges. The resistance measurement is fast at an outstanding accuracy of up to 1% on most ranges.
Other than just resistance and current, it can conveniently measure voltage, test diodes, measure continuity and also does have the non-contact voltage measurement feature included.
Besides just being convenient to use, it’s also quite safe since it comes with the CAT II and CAT III at 600V overvoltage standards. The housing is durable and heavy-duty with protective rubber sides for drop protection.
7. INNOVA 3340 Automotive Digital Multimeter
If you’re looking for a multimeter that’s professionally designed for automotive troubleshooting, then you should definitely try this one out.
First off, it features the autoranging function which saves you both the time and the trouble of having to set the range yourself. Other than just the autoranging function, there is also the auto shut off feature that’s triggered if the multimeter goes idle for some time.
UL certification is one of the best ways to know a multimeter is completely safe for use. With this included on the INNOVA 3340, you’ll be saving on a lot of power. The unit also does have the overload protection feature for ultimate safety.
As far as convenience is concerned, you can be able to test alternator diodes, duty cycle, solenoids, the breaker points, basic wiring, switches among other automotive components. It also does have a temperature probe for measuring temperature in Celsius and Fahrenheit.
8. Amprobe AM-510 Commercial/Residential Multimeter
Wouldn’t it be awesome to have the guarantee that your safety will be completely covered by purchasing a multimeter. Well, that being said, safety is just but one of the most awesome features that this multimeter comes with. Let’s take a look at what you’ll be getting, shall we?
Starting with the safety, the Amprobe AM-510 has got the CAT IV 600V as well as the CAT III 1000V rating which, for a digital multimeter in its class is possibly the best. other than this, it has been tested and verified for safety by third-party safety labs i.e. CSA and ACMA.
Other than these, it has also been assessed to meet high safety health and environmental protection requirements within the European Economic Area ()
The key measurement features on the multimeter that’ll be quite handy include 600V for both AC and DC, it also does measure AC and DC currents. There are two temperature inputs as well as the duty cycle measurement.
The peak hold feature is also included and in addition to this, you can be able to measure continuity, resistance, diode testing and also enjoy the MIN/MAX data hold feature.
The multimeter is also the autoranging and manual ranging type hence you can switch to either that you are comfortable with.
9. AstroAI Digital Multimeter, TRMS 6000 Counts Volt Meter
Coming up second last on our list is the AstroAI Digital Multimeter. From the name alone, you can tell that this one will definitely give you a kick for your buck considering it’s TRMS multimeter. This simply means that you’ll be getting the best accuracy.
The multimeter also does come with both the manual and autoranging features on it. If you prefer to set the range yourself, it’ll suit you best and the same goes for when you’re in a hurry and wouldn’t like to go through the hassle of setting the range yourself.
Usability is also meant to be in your favor considering the multimeter comes with convenient features such as data hold and a large LCD backlit screen for use in dim light. there's also a kickstand which allows you to use the meter hands-free. The meter also comes with a hanging magnet for ideal storage when not in use
Something else that’s quite amazing about this multimeter is auto shut off. If you happen to leave it on accidentally, it’ll save on power by turning itself off automatically.
10. Proster Auto-Ranging Digital Multimeter 6000 Counts
Wrapping up our review, we have the Proster Auto-Ranging Digital Multimeter. Well, to cut to the chase, this multimeter can be defined by one word- outstanding. Here’s what you’ll be getting from it…
First off, it’s a 6000-count multimeter which makes it one of the most accurate multimeters you could get for a price below 100.
Around the multimeter is a protective rubber sleeve that’ll conveniently be able to protect the meter from any damage just in case you happen to accidentally drop it. Also, the multimeter does come with a built-in support stand that allows you to use it hands-free without having to struggle at all.
There is the low battery indication feature on the meter that lets you know when it’s time to make a replacement. In addition to this, the multimeter comes with the data hold function which easily enables you to take your readings even after you disconnect the probes.
The multimeter does come with test probe slots and in addition to this, it does have an auto power-off feature that is triggered after 15 minutes of being idle to save on power.
Watch The Last Video How to find The Best Budget multimeter
We’ve already had a look at most if not all of the major things you need to take into account before getting yourself a digital multimeter. Truth be told, getting one will be much easier now. Other than just the buyer’s guide, we’ve also compiled a product list of 10 of the Best Multimeter Under $100.
With this review at your disposal, you have absolutely all you need to get the best multimeter under 100. Regardless of whether you need one as an upgrade or simply your first one, each one will do just fine.
All in all, I greatly recommend that you do take your time to know exactly what you want from a multimeter since this way, you’ll only get the best.